Tranect logo
splice connector from BS13600 CW004A copper
 Site Map

Connectors

  splice connector from BS13600 CW004A copper

Splice Connectors

Tranect splice connectors are manufactured from high conductivity seamless copper tube, annealed and electro-tin plated to combine maximum electrical conductivity with mechanical strength.  They are manufactured to suit a range of cable sizes and are available with or without an inspection hole.  They are suitable for connections  between cables and are especially useful where a section of cable needs to be replaced.

 
BR Cat No TRANECT No
54/103496 LJ
54/103501 LK
54/103506 LL
54/103515 LM
54/103520 LN
54/103510 LO
 
Material: Made to our specification from high conductivity copper BS EN 13600 CW004A seamless copper tube. An inspection hole is provided to check cable location prior to crimping.

Finish: Annealed and electro-tin plated - 5 micron minimum.

Identification: The palm of each terminal is stamped with the crimp size code letter and embossed on crimp form after crimping

Tools: Use Tranect 35T hydraulic crimping press and crimping dies. Please refer to the data table for the appropriate crimp size code letter for the crimping die. Use Tranect “Go” gauge to check each crimp or measure the crimp using the crimp “Go” gauge dimension given on the data table.

To Order:Please specify catalogue number and length 'A'.

 
Cable  mm Crimp Size
Code		 Crimp "Go"
size in mm		 Type “L” Type “P”
Flex Strand Catalogue
number		 Length - mm Length - mm Catalogue
number		 Length - mm
“A” “B” “A”
10 10 F 4.8 LF 31 14 PF 14
16 16 G 5.45 LG 31 14 PG 14
25 25 H 6.45 LH 40 18 PG 18
35 35 I 7.45 LI 40 18 PI 18
50 70 J 9.5 LJ 49 22 PJ 22
70 95 K 10.85 LK 49 22 PK 22
95 120 L 12.5 LL 57 26 PL 26
120 150 M 13.1 LM 57 26 PM 26
150 185 N 14.5 LN 57 26 PN 26
185 240 O 16.3 LO 67 30 PO 30
240 300 P 18.2 LP 67 30 PP 30
300 400 Q 20.5 LQ 79 36 PQ 36
400 500 R 23.7 LR 79 36 PR 36

Split Connectors

Tranect split connectors are manufactured from high conductivity solid copper rod, annealed and electro-tin plated to combine maximum electrical conductivity with mechanical strength. They are manufactured to suit a range of cable sizes and are available with or without an inspection hole. They are designed to be bolted and unbolted, enabling power modules/motors to be isolated and removed for ease of maintenance.		 split connector diagram
split connector from BS13600 CW004A copper
Cable mm² Crimp Code "Go" size Cat. number
Flex Stranded
25 25 H 6.45 C2158D
35 35 I 7.45 C2158F
50 70 J 9.5 C2158E
70 95 K 10.85 C2158G
95 120 L 12.5 C2158H
120 150 M 13.1 C2158B
150 185 N 14.5 C2158J
240 300 P 18.2 C2158C
  Material: Made to our specification from high conductivity copper BS EN 13600 CW004A seamless copper tube. An inspection hole is provided to check cable location prior to crimping.

Finish: Annealed and electro-tin plated - 5 micron minimum.

Identification: The palm of each terminal is stamped with the crimp size code letter and embossed on crimp form after crimping

Tools: Use Tranect 35T hydraulic crimping press and crimping dies. Please refer to the data table for the appropriate crimp size code letter for the crimping die. Use Tranect “Go” gauge to check each crimp or measure the crimp using the crimp “Go” gauge dimension given on the data table.
Copyright Tranect ©2009. Site design by Webwizards. All rights reserved.